Why Quick Disconnect Fittings Must Work Properly

There are a wide range of products on the market that can solve problems with moving fluids or air through the lines. No matter the industry application or the type of system you have, though, there has to be a fail-safe. That is, there needs to be a fast and easy way to stop this flow to ensure that you can ensure safety is always possible. This is where quick disconnect fittings come into place. Though it may seem faster and easier to replace them with a standard fitting, doing so could create a safety hazard. Why This Style Matters What makes the quick disconnect fittings unique is just what their name implies. The design of them allows for you to easily and without any tools disconnect the fittings from each other. Because it does not require the use of tools, you can get it done in seconds – there is no delay in getting the fittings removed. Rather, if there is a reason for disconnecting the fittings in a matter of seconds, it is easy enough to do here. Most importantly, you do not have to worry about your team stepping away to find a tool to do so. Finding What You Need When you have a system that has such a fitting, it is important to understand how it works. It is also important to replace it with the safe type. If you are not sure of the size, material, or features, work with the company to help you. Take a few seconds to choose the best quick disconnect fittings for your needs. You may find that this is one of the easiest ways for you to get your system back up and running. Choose the right connector and fitting for your system. Be the first to...

read more

Skid Steer Vs Excavator Drill Attachment

If your company performs drilling operations, you need the right equipment for the job, and some rigs serve your purpose better than others. Drilling attachments make excellent additions to your equipment fleet, but should you use an excavator or skid steer drill attachment? Let’s explore both options to see. What are Drilling Attachments? Drill attachments fit on equipment like skid steers and excavators. They are perfect for companies wanting mobile drilling rigs and can drill in areas of limited access. There’s no need to invest in extra equipment as you can use one of your excavators or skid steers. Excavator When your only equipment is an excavator, the solution is a “no-brainer.” However, most contractors have both and perhaps several excavators and skid steers. If you own more excavators than skid steers, you may want to buy a drilling unit for an excavator. This way, if your drilling excavator suddenly goes down, you can transfer the drill to another one. The best drilling attachments have three mounting options. You can choose, front, side, or rear. This gives you advantages over skid steer systems because you have more drilling options. Two-piece mounting makes changing out your drilling rig quick and easy. Skid Steer Perhaps your business does a great deal of excavation. If so, you might consider buying a skid steer drill attachment. Since skid steers are usually smaller than excavators, you can use your drilling rig in tighter and hard to reach areas. Skid steer drilling rigs can work from the right or the left sides. Because they drill at right angles, you can move them in any direction. With a reversible unit, both up or down drilling is possible. If you are not sure which drill attachment is right for you, contact a trusted source for drilling equipment. Be the first to...

read more

The Hydraulic Rock Drill and Its Many Benefits

Are you in the excavation or drilling business? Perhaps your company needs to drill and sometimes you run into some serious issues with rock. A hydraulic rock drill can be one of your most valuable tools in times like these. In fact, you will enjoy a wide range of benefits with these specialized rigs. Let’s look at some of the good things they have to offer. What is a Hydraulic Drill? Hydraulics is used in many industries today, including the car you drive to work and for pleasure. When fluid is pressurized it can be used to drive and stop very large equipment. Hydraulic cylinders have pistons driven by fluid force and they are capable of lifting very heavy weight and digging far into the earth with this power. Fluid powered drills can be mounted on heavy equipment as attachments. They work in a similar manner to hydraulic jack hammers except, fluid is used for power instead of air. Some systems utilize fluid as cutting oil or coolant and to flush out debris. This hydraulic rock drill equipment slowly releases water into the hole during the process. Water can act as both a coolant and a means to keep debris flushed out. Benefits There are a lot of reasons to consider hydraulic drills. For instance, they offer a great deal of power for their size and can easily be placed on the equipment you already own. Because they are relatively light in weight these drills are easy to move about and maneuver. Hydraulic drills are often used by utility companies and contractors because of their versatility. Because they see such a wide variety of use, there are many in operation and this helps to make them affordable to both large and small businesses. Here are some of the uses you can enjoy: Blasting applications – it’s necessary to drill holes in strategic places to remove large amounts of rock. Anchoring – It takes special drilling methods to install anchors into very hard material without...

read more