250 Mcm Welding Cable: Your Questions Answered

by | Apr 7, 2015 | Electrician

Recent Articles

Categories

Archives

Regardless of whether you are purchasing 250 Mcm welding cable or 350 Mcm welding line, both kinds of cables are strong and flexible. Welding cable in and of itself, in fact, must be done more easily support the welder’s movement and safety. The higher thread count that is featured by the wires, and their ability to withstand environmental extremes, make them preferred components not only in welding, but also in applications where strength and resilience are imperative.

Welding cable, such as 250 Mcm welding cable, is usually hooked up to a welding machine that is DC powered. While both AC and DC powered machines are used in the welding trade, the DC welding machines are more common.

250 Mcm Welding Cable and DC Powered Machines

With respect to using 250 Mcm premium extra flexible welding cable and similar lines, DC machines are preferred as the welder has more control over the charge of the electrode and the resulting weld. If a welding machine does not feature a switch in order to change the charge (polarity), then the welder has to change the terminals on the cable himself.

When utilizing a DC electrode positive (DCEP, DC+) polarity, the arc’s heat is greater at the rod or electrode as the electrons are flowing from the material or work piece to the rod. With a DC electrode negative (DCEN, DC-) polarity, the arc’s heat is greater at the material or work piece as electrons are flowing in the opposite direction, or from the rod or electrode to the material or metal.

Using 250 MCM Welding Cable 600 Volt Lines with DC Machines

So, when using a 250 MCM welding cable 600 volt line, for instance, with a welding machine, the welder should always follow the manufacturer’s instructions about electrode use. That is because electrodes or rods vary in their design and are either compatible with DCEP or DCEN polarities.

With respect to cable usage and other cable designs, AC welding machines require the use of special AC rods or electrodes for use as the polarity is not fixed. However, if a welder does use an AC electrode on a DC machine, he usually can find at least one charge he can use to utilize the rod.

Needless to say, whether you are using a standardized welding cable, custom cable, or another type of welding line, durability is imperative. Welding frequently occurs in industrial environments that are open to a number of possible hazards or dangers. Therefore, cable wires are generally premium, high-quality wires.

You can sort out the right welding cable for your project by scanning the cable selections on the Electric Wire and Cable Specialists website. Reviewing the site is helpful in obtaining a better understanding of the cable types.

Related Articles