How to Tell If Your Water Heater’s Thermostat is Set Too High

by | Jul 2, 2019 | Plumbing

Recent Articles

Categories

Archives

No one wants to get into a scalding bath or burn their hands when washing them. If the water coming from your shower and sink is too hot, even after adding some cold water, there may be an issue with the thermostat or its settings. Here’s what you should know to find out if your water heater in Concord, CA, is set too high.

The Thermostat

The thermostat is one of your water heater’s main components. It regulates water temperature by switching the heating elements on and off when the water gets too cold or too hot, depending on the chosen setting.

Normal Water Heater Temperature

A plumber will usually recommend a setting of 120 degrees Fahrenheit. Often, new water heaters are set at 140 degrees, which is most manufacturers’ default setting.

Checking Your Water Heater’s Settings

It’s easy to check your water heater’s temperature with a cooking thermometer. Simply run hot water from a nearby faucet, place the thermometer under the stream, and check the reading.

Setting the Temperature

There are a few steps to follow to set your water heater’s temperature, depending on the type of unit you have.

For a gas water heater, look at the thermostat to determine the current setting. Turn the dial on the gas control valve, and ensure that the flame is properly lit.

For electric units, begin by flipping the appropriate circuit breaker. Remove the unit’s access panel and insulation to get to the thermostat. Adjust the screw and replace the access panel.

Though most homeowners will find it easy to change their water heater thermostat settings, it’s not a job for everyone. If you’re unsure about the process, call a plumber for help.

Here, we’re ready to help with your water heater in Concord, CA. For additional information on installations, repairs, and maintenance, give us a call today.

Related Articles